Counting matching models…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
Original design by ImpulseRC. ImpulseRC Apex EVO original sized cam mounting brackets for customization. Print in TPU with 0-20% infill with no supports. Same size as original, so suitable for O3 cam and others.
HD Cam: GoPro HERO 11 mini Frame: ImpulseRC Apex Tilt: 25deg (Message me if you need some different tilt) Compatible with TBS ND filter Post your makes! Since camera isn't available yet some holes may be a little inacurate (I did my…
Motor / Arm guard for APEX 5 ImpulseRC, fit with everything motors who diameter doesn't exceed 30mm (My 2207.5). They are perfect for bando. Print settings: Material - TPU Infill - 30% Walls - 3 Supports - Touching Buildplate
Print in TPU file "up" and PETG file "down" The file is the same as the other one but with more space for the motor.
Like my other two versions (the picture shows actually the TBS SourceOne version) an antenna mount for the 2.4GHz ExpressLRS T-Antenna. The holes have a diameter of 5mm and the distance (center-center) is 24mm. Should fit on the standoffs…
ImpulseRC APEX EVO DJI O4 Pro camera TPU insert Use the original CNC aluminum side plates with the DJI O4 Pro camera. This replacement TPU insert replaces your existing one, enabling seamless compatibility with the DJI O4 Pro camera while…
Official 3D printable files for the ImpulseRC Apex frame!
I liked the original design because of its clean surfaces and edges. I've just tweaked it a little bit and added the base for the ApexEVO frame. !IMPORTANT!{begin} The gap between the front propellers and the mount is about 6mm. I haven't…
Default skids with added bumpers to protect the carbon somewhat. Remixed to make a couple of the screw holes larger so the button head goes all the way to the carbon, to better secure the motor. Note you will need shorter screws Print…
I modified Will Cheyney design to accommodate a better range of motion. there are 6 variants: 20° 25° 30° 20° -1mm 25° -1mm 30° -1mm The pictures show 25° with 0mm and -1mm offset. I also moved the camera 2mm down making it stick out…
STL files for the injection molded pieces as well as various antenna mounts, plus a DXF file for a HD camera mount base, are available for free download under the Creative Commons license. from http://apex.impulserc.com/
Walksnail antenna mount for the apex. EDIT: Added a mount for the HD apex as well.
This is mount for Caddx Ratel 2 onto ImpulseRC APEX frame. It requires only two m2 4-5mm screws to secure camera itself I have printed this in PLA and it fits just right
This is a basic model used to secure the DJI air unit to the ImpulseRC Apex frame. There are two pieces the airunit holder that has the antenna mounts built in as well as the front shim that will go over the front of the AU to secure it…
ImpulseRC APEX EVO side plates for DJI O4 Pro camera mounting Struggling to mount the new DJI O4 Pro camera on your ImpulseRC APEX EVO? Try these custom side plates to solve the compatibility issue. Based on the original CNC aluminum…
In my opinion, the height of the spacers was too small to accommodate the ESC and flight controller properly. So I increased the spacers by 10 mm and constructed my own bracket. I would be happy to receive comments and suggestions for…
Wanted an easier to print version of the original model I found on thingiverse, and since I didn't find one I just modified it by myself. This version doesn't have weird 90 degree overhangs anymore, so no supports are needed.
Print it in TPU! I recommend SainSmart TPU! Support Me If you like my free designs and want to support me and my FPV Blog: Patreon Buy me a Beer on Thingiverse ("tip designer" on the left) or simply like my Facebook Page…
This is a rugged motor protection for the Impulse RC Apex frame. I made this to protect my motors in bandos. Each TPU is around 8 grams. Printing tips : - Use auto orientation if your slicer supports it. It should rotate it so that the…
Print out of TPU. I print the antenna holder as-is, and the VTX holder with its butt on the bed. Assembly instructions Slide the standoffs into the vtx holder before assembly Slide the vtx holder onto the frame and secure with screw…
Impulse RC Apex EVO ELRS antenna holder, protects the wire antenna. Just like my other holder for the AOS3.5, bend the holder backwards and insert the ELRS antenna wires, then slowly put everything together. Print with TPU at 100% infill…
Todas las piezas necesarias para el clone del frame chino Steel 5 pulgadas incluye dos carcasas para la GoPro hero 5\6\7, protectores de cables de motores que se deben imprimir con PLA, patas protectoras para aterrizar, protector…
ImpulseRC APEX EVO DJI O4 dual antenna stubby mount Looking for a secure and durable solution to mount the DJI O4 dual antennas on your ImpulseRC APEX EVO? This stubby mount keeps your antennas low profile and ensures proper placement.…
Mount to place two Walksnail V2 stock antennas on an ImpulseRC Apex. Mounts the same as the stock antenna mount. Also works with my GPS/USBC mount I find printing it standing on edge with antenna mounts straight up and supports on bed…
I haven't found an antenna mount that allows mounting my generic ELRS receiver to my Apex HD frame. Specifically, I'm using this receiver with the pictured antenna Just insert the hex standoffs into the printed piece, insert the antenna…
The model should be printed in TPU to ensure flexibility and endurance. Fits with the Vista Air Unit nicely. Use light force with a wrench to insert the the standoffs and the SMA connector. Stock 0.2mm Prusa settings with no support…
Neatly park your RX and Cap between two standoffs.
This is just a basic whoop guard for the ImpulseRC Micro Apex 3 inch. This version is for standard analog setups as there's not much room for digital vtx to be installed. Please note this adds relatively significant weight to the drone.…
Remix that allows printing the bottom part with PLA and the top part with TPU.
This is a replacement key for the ImpulseRC Micro Apex frame. If it is in stock from ImpulseRC, you should buy it from them. But sometimes you lose your key in the field. And often ImpulseRC is out of stock. So this is a stop gap to keep…
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
rear mount for finder https://de.banggood.com/Finder-YR50B-Super-Loud-Buzzer-100dB-Dual-LED-for-FPV-Racing-RC-Drone-p-1585819.html?cur_warehouse=CN&rmmds=search Category: 3D Printing
It should fit for the frame. Couldn't try it myself, so I hope it works. ;) There are two versions. Their only difference is the orientation of the hex stand-offs.
This camera mount, printed in two parts holds the DJI 04 pro air unit camera in place. The 04 camera is too wide which causes it not too fit between the two standoffs on the front of the frame. These brackets, printed in TPU hold the…
Since I replaced the original antennas of the Caddx Vista, I also needed a new mount. So fix measured the antenna and created the mount.
Antenna mount for the Foxeer Lollipop 4 antenna with short tube and UFL connector for the ImpulseRC Micro Apex Frame
This is really made only for the Foxeer T-rex, however it will possibly work with other 22mm mini cameras where the length from the center of the screws to the lens is 16.5mm or less. Made for printing in TPU, no extra tolerance on the…
Mount for Foxeer M10Q 180, USB port for Walksnail V2 VRX, and ELRS "T" type antenna on an ImpulseRC Apex. Works with Stock VRX antenna mount or any VRX atenna mount that is 6mm tall at the standoffs. Should work with other 18x18 GPS units…
A quick and dirty adaption of the Matek M9N-5883 holder for the 5" ImpulseRC Apex frame. Mounts the GPS out the back and at a slight angle. Use self-tapping screws or machine screws + superglue as a ‘threadlocker’. Can also put down a…
print it with TPU, much lighter than original work even better
Suitable for Walksnail or DJI Dual Antennas. Designed for ImpulseRC Apex Std & HD but Mount can be flexed to work with many others. Standoff adjustable from 16mm-34mm and is 20mm tall. Access hole for Walksnail VTX updates. Super easy for…
Hope it helps someone :) For ANALOG APEX Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No Supports: yes Resolution: 0.2 Infill: no - use 500 perimeters insted Filament: Sainsmart TPU 95A Purple…
This print is for TPU. Print Settings Printer Brand: Alfawise Printer: Alfawise U20 **Rafts:** No Supports: Doesn't Matter **Resolution:** 0.1 Infill: 100% **Filament:** 3DFR TPU BLACK Notes: I made tris print with only one wall to ensure…
This antenna holder keeps the DJI O4 antenna's at the top of the frame. Printed in TPU this mount is press fitted over the two back standoffs. You could glue the two DJI antenna's in place but I chose to just press fit these.
The hex-holes have a distance (center-to-center) of 32mm. Apex Evo Update(2023-01-05): I uploaded a new version of this design which has 30 degrees turned hex holes. (Especially for Mark and of course everyone else whose stand offs are…
print in TPU Category: 3D Printing
Its ImpulseRC Apex TBS mount for DJI Air Unit just for one side. I am still work on it …
Piece that holds the antennas for the DJI O3 Air Unit and the RP1 ELRS receiver and keeps them protected from being hit when crashing the drone. The piece has been designed for the ImpulseRC Apex EVO frame, but might work for any drone…
printed with filamentum TPU Category: 3D Printing
I designed a holder to mount the Walksnail Avatar VTX Antenna V2 on the Micro Apex Frame. But it should work with others
I can not vouch for the durability of this but we all know that is not going to be for absolute freestyle bashing. I think it is more of a solution right now for those of use that want to use the apex in its standard layout for cinematic…
ImpulseRC Echo DJI O4 dual antenna stubby mount Looking for a secure and durable solution to mount the DJI O4 dual antennas on your ImpulseRC Echo? This stubby mount keeps your antennas low profile and ensures proper placement. Design…
A GoPro mount tailored to the ImpulseRC Apex, with a stubby knob to clear bent props. The optional bottom lock is to keep the mount to your top plate as well as added support in the middle of the mount. Use a M2 bolt up to 8mm long. F3d…
This is a sturdy lipo protection for your bando sessions.
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC ApexMicro ELRS-Antennaholder for 2.4G Radiomaster-Antennas How to Print…
Camera mount for the Insta360 SMO 4K fitting on an ImpulseRC Micro Apex and a tail mount for a buzzer (use heat shrink to attach).
Gopro half mount for the Apex Evo top plate. Fits Gopro 9, 10, 11, and 12.
I used PLA filament, 100% infill and printed the part bottom side up with full supports due to the "alignment nub". I used 8mm mounting for 2207 motors & M3x10 bolts.
Modified the official SMA mount to hold the DJI MMCX antenna. Other designs were a bit tight with the cable fit so these tubes are a bit longer. Also the bottom antenna on other designs dipped below the bottom plate causing the quad to…
HD mount made for the Runcam 5 camera and the impulseRC APex frame. Has a slot for ND filter. You do need to use supports. best printed on the side. Print in TPU.
This is just a basic whoop guard for the ImpulseRC Micro Apex 3 inch. This was originally intended to be used with the Switchblock which mounted the VTX and camera above the frame. If you're looking for the model that suits a standard…
This is a DJI air-unit and TBS Immortal-T mount for a ImpulseRC Apex HD. No glue is needed. There is space underneath the air-unit for the air-unit cable and the Immortal-T cable. There are also still space for a nice battery strap. The…
Little backpack for impulse-rc apex for crossfire gps and caddx vista antenna no support needed tpu 100% infill if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
There are two versions. The only difference between them is the extra cut-out for the recording-light above the front screen of the GoPro. Check that there is enough clearence between the camera body and the front propellers!
Here's a simple arm and motor bumper I made some time ago, wasn't happy with how others protected the motor and also I wanted something that can withstand “hard landings” and give some skid protection from below. Works great in my…
Print the protective cage out of PETG or ABS. 2 versions available. one for m3 heat set inserts with 4mm holes and one for direct screwing (for the lunatics) with m3 holes. Print the gummies out of TPU. one for each side. no mirroring…
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC Apex Micro 19mm Camholderextension Advantsges No props in view with 5"…
A mount for the DJI Action 2 on the ImpulseRC Apex, including a separate ND filter slot for the TBS ND Filters and a cover for the ND Filter while in transport. NOW WITH V2!!! Adds holes in the back for easy of installation. ***NOTE**:…
DJI Action 2 mount for impulserc apex 5" drone frame. Print on side with minimal support. Best results with soft tpu like fiberflex 30d. You should use strap to secure camera. Mount compatible with magnetic ND filters like sunnylife.
The DJI Action 2 mount fits perfectly and holds the camera securely even in crashes. It allows you to use the full camera FOV and easily switch between 16:9 and 9:16 by physically rotating the camera in the mount. Print settings: Material…
Hope it helps someone :) Mount for ELRS antena and M80 Pro GPS from HGLRC. Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No Supports: yes Resolution: 0.2 Infill: no - use 500 perimeters insted Filament:…
Attach a gopro mount to the ImpulseRC apex using the tripod mount.
Fits Both the standard Apex evo as well as the DC
I bought an overkill receiver and decided to find away to add it all onto my Apex Exo DC it will also fit the standard Apex Evo or most quads with 32mm rear standoffs. To Print you only need supports on the very bottom, everything else…
A vertical mount for the Tracer antenna on an ImpulseRC Apex drone. Needs one small cable tie/zip tie.
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
The Crossfire antenna mount is designed to fit the ImpulseRC Echo without the need for glue or additional parts. Print settings: Material - TPU Infill - 30% Walls - 3 Supports - None
This is a mount I made for the apex. It holds a vista antenna, rush cherry, or foxeer lollipop and a tbs tracer antenna.
I really liked the original design. Made a remix with the ability to fix the arm protection.
A remix of fpvtobi's "ImpulseRC APEX GoPro HERO 6/7 Mount" ( https://www.thingiverse.com/thing:4113660 ) design with the camera angle reduced to 20 degrees. gcode provided for MK3S
DJI O4 Camera Mount for ImpulseRC MicroApex 3 fixed at 10° because more that that and it don't fit M2.5 Heatset Inserts
one of the 2.4 antenna needs to be pushed in from inside the mount (from the back) the other needs to be bent to get into the other section. once in position, i used a small amount of epoxy glue just to keep them from moving. more than…
This is a DJI air-unit, GPS and TBS Immortal-T mount for a ImpulseRC Apex HD. It is similar to my previous version. But this version also has a GPS antenna mount for a TBS M8 GPS module and uses a set of RushFPV Cherry antennas. I have…
🛠 Apex 5 HD TPU Parts Library A versatile collection of parts designed for the ImpulseRC Apex 5 Evo frame. Whether you are running a standard O3 build, a naked Flywoo O4 Lite, this pack has you covered. 📁 File List & Descriptions:…
Einfache Halterung für eine Nebula Pro.
This is a camera mount-bumper for the legendary ImpulseRC Apex, adaptating it to modern standarts, adding more space inside, protecting the camera and partially removing the props out of the view. Unlike other mounts, it doesn't require…
Its remix GPS holder for Apex frame
Mount for the Insta360 Go2 onto an Apex EVO frame Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: PhaserFPV TPU Black Category: R/C Vehicles
Aileron pour le ImpulseRC Apex
Remixed the shell to be slightly larger, so the gopro slips in and out a bit easier (still a bit tight). Includes 20 and 30 degree versions Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 100…
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC Apex Micro 14mm Camholder Protects your 14mm cam very well No Props in…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
Print in TPU, secure Antennas Tubes with Zip Ties, ready.
This is a antenna mount for the impulserc Apex with the dji body.
This design is for the Flywoo action camera case V2.1 for a naked GoPro. I've uploaded different angles. Starting from 10 degrees to 35 degrees, with 5 degree increments. To make it easier to identify the angle once printed, it is stamped…
….The 04 antennae mounts have been extended slightly to better protect them…ignore the quality of the tpu..its wet through and iv ran out. This is very tight to fit everything in, you don't have to use the gemini reciever using something…
Update: I bought a Reverb arm since this has so many downloads. Perfect fit now! Replica Apex skids for your Reverb! This will add 2mm of depth. Print Settings Rafts: No Supports: No **Resolution:** 0.12mm or .2mm Infill: 100% Category:…
ImpulseRC Micro Apex holders for Foxeer M10Q 120 GPS. Flat and 30 degrees curved.
