CREALITY K1max - MULTIBOARD PANELS [WITH ORIGINAL PANELS]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉.
*These PANELS are identical to the MULTIBOARD system, fully compatible with all existing MULTIBOARD components.
/////ATTENTION - PDF GUIDE AVAILABLE AT THE BOTTOM OF THE FILES SECTION
______________________________________________________________________________________________________________
/////LINKS FOR THE HARDWARE USED IN ALL MY PROJECTS * affiliate links
INSERTS M3 x 4mm (L) x 5mm (D): https://amzn.to/3EovAVw
HEX SOCKET CAP M3 6mm-30mm (STAINLESS): https://amzn.to/4imGAQW
HEX SOCKET CAP M3 6-20mm (BLACK): https://amzn.to/3R7wjx4
FLAT HEAD SOCKET CAP M3 4mm-12mm (STAINLESS): https://amzn.to/3G3Z1wr
FLAT HEAD SOCKET CAP M3 8mm-25mm (BLACK): https://amzn.to/43JeThP
________________________________________________________________________________________________________________
/////UPDATE 0.2 - 30/05/2025
- K1 MAX – MULTIBOARD PANEL OPTIONS
There are two versions of the mounting holes for the side fan on the K1 Max.
Since I cannot confirm if V1 is wrong, both versions are available.
- If the holes for the side vent on your printer matches V1, use the multiboard panels with V1 in the name.
- If the hole for the side vent on printer matches V2, use the multiboard panels with V2 in the name.
*Check your printer before printing to make sure the panel fits correctly.
/////UPDATE 0.1 - 26/05/2025
- The R2, R2 SENSOR and L2 parts had an error and have been updated.
*If you use the version with the sensor repositioning, you need to INSTALL FOUR M3X5MM(L)X4MM INSERTS ON WALL 2 on the left side.
Make sure the bolts aren't too long. They shouldn't go past the frame's thickness to avoid damaging any internal components.
*THIS PROJECT IS DESIGNED TO BE USED WITH THE PRINTER'S ORIGINAL SIDE PANELS.
The PANELS are identical to the MULTIBOARD system, fully compatible with all existing MULTIBOARD components.
REFER FOR MORE INFO: https://www.multiboard.io/
The project parts should be PRINTED in ABS or similar materials due to their resistance to high temperatures, ensuring durability and reliability.