1 / 6
Creality K1, K1C, K1 Max Z Carriage for T8 Oldham Coupler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z Carriage for T8 Oldham Coupler with small optimizations for 6mm thick bed. STEPs
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 912
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (2)Kolekcje (55)Powiązane
Based on Henlor's masterpiece.
Designed for Mellow's/VzBoT's T8 Oldham coupler (22 mm diameter).
BOM for one carriage:
2 x M3 standard heat insert (M3x4,6x5,7)
2 x M3x6
I used PA6-GF25 for V1 and managed to press the bearing into the model so the locking screw is voluntary.
Changelog:
V2 (22.12.2025) - 8,3 mm clearance over the T8 collar; smaller fins around the bearing
V1 - initial