CMF Phone 2 Pro metallic backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backplate holder for the CMF Phone 2 Pro for d = 40 mm or bxh 65x45 mm metallic backplate with thickness 0,5 mm
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Hello everyone!
To the Universal Cover, i added some recesses for a metallic backplate, so you can attach them in your magnatic phone holders, for example this one. The original magsave is still available and usable.
The dimensions of the metallic backplates, that you can insert, should be 0,5 mm thick and should have following dimensions:
| round backplate | square backplate |
| ⌀ 40 mm | 45 x 65 mm with r = 10 mm edges |
 |  |
Recommended print settings:
- I printed it with PETG. You can try some other filaments too!
- Layerhight 0,2 mm, first layer 0,24 mm
- Infill can be 100% for more stability
- perimeters: 3-4
- supports are needed
If there are other dimensions for the metallic plates, feel free to comment, i can add other versions!
All credits to CMF and a big thanks for making this contest possible!
Just for note, the bottom right utility screw is not screwed in, it just lays there for the look. The screw is to short to fit.
Works great in my car, see the photos!
Have fun with it and happy printing!