Ikea Bekant / Galant desk - cable management net mounting system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to install the cable net onto the frame.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 1938
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
As I replaced the tabletop of my desk and used all "clips" to install the new tabletop, i couldn't longer mount the cable management net.
This mounting system allows you to mount the included cable management net.
Also check out the screw cover for this table, as it drastically improves the looks:
https://www.prusaprinters.org/prints/129920-ikea-bekant-galant-desk-screw-cover-cap
Print Settings
Printer: Anet A6
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 20-30%
Notes:
You should add light supports to the "arm", the overhangs on the outside print well without any support. Print it with the front to the bed.
The middle plate should be printed with the flat side to the bed. It might need a little support on the knob.