1 / 3
Voron 2.4 Exhaust cover with dual PG7s — zdjęcie 1
1 / 3

Voron 2.4 Exhaust cover with dual PG7s

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Supports dual umbilicals or really any additional cable that can fit in a PG7.

Ocena
0 / 5
Polubienia
6
Pobrania
48
Wydruki
0
Wyświetlenia
313
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Now with 100% more PG7!

I needed a second PG7 to support a USB cable alongside my CAN umbilical, so I modified the model I was already using to add another PG7 mount. 

Several options for positioning, choose which will work best for your setup. 
Pre-oriented and no support needed, just slice and print!

Has a bung for a PC4-M10 fitting on the right side for bowden routing, feel free to mirror the file in your slicer to have it on the left if you so choose. 

Works with the standard Voron exhaust hex grille to sandwich it on the rear panel. I recommend printing this part in your accent color!

Print according to Voron standards: 0.2 layer height, 0.4 line width, 5 top and bottom solid layers, 4 walls, 40% infill, using ABS/ASA or better. 

STEP file included for additional remix potential. 

Tagi