ADAPTER - VACUUM TO 50MM (2") PVC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter is useful for anyone mounting a rigid pipe to a workshop vacuum or other machine with a 58mm inlet.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 1027
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter fits a standard 2.5" (which isn't 2.5") vacuum inlet to a female 50mm PVC fitting, which is also useful for connection to sanders and other kinds of bench equipment.
The vacuum end tapers from 57.5mm to 58.5mm so please check your fitting - when checking I like to take a slice from about half way along the model (in the slicer) and print a ten millimetre section to check for fit.
A couple of turns of Plumber's PFTE (teflon) tape will make a very smooth and easy to disassemble joint.