1 / 1
ADAPTER - VACUUM HOSE TO 50mm PVC
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows the connection of a 50mm vacuum hose to any 50mm PVC fitting. Choose from long or short!
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 312
- Wydruki
- 0
- Wyświetlenia
- 1797
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (123)Powiązane
This simple adapter allows the direct connection between a 50mm vacuum hose and any two inch (50mm) pvc fitting.
The STL is in two sizes - the short one is pictured, I printed the longer one because I had a particular use for it so thought I would provide it as an option.
The shorter one is fine and uses less filament!
I've printed them in PLA .20 mm layer height.