esp32 devkit USB-C 30 pin case (ESP-WROOM-32)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-fit case for the ESP32 devkit 30 pin with USB-C connector, specifically for this version from Amazon US but…
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 493
- Wydruki
- 2
- Wyświetlenia
- 2031
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Snap-fit case for the ESP32 devkit 30 pin with USB-C connector, specifically for this version from Amazon US but presumably would fit others. For my own prints I include my name embossed on the inside and a descriptive label in multicolor on the outside which I've removed for this upload. The model does include embossed text ("esp32") and USB indicator on the inside and “EN” and “BOOT” on the top surface near access holes for those buttons. There's a version uploaded as “No text” if you want it all removed. Photos show a print from my A1 mini in Bambu PLA Matte White at 15% infill and 2 walls.
2025-07-05 - Now includes separate bottom with multiboard/opengrid bolt hole.
Category: Electronics