Track for rc skid-steer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Track for LXYRC T770 skid-steer
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I made spare tracks for my rc skid-steer, because i had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader. With the self made tracks, the grip level is a little bit lower and the tracks don't slip off the wheels.
The tracks are made for the lxyrc T770, but i think, the RC4WD R350 is the same skid-steer and they should also fit on it.
I printed the tracks on a Prusa MK4, Filament Primalloy from Verbatim, printed with raft but without support. I printed the tracks with different layer hights. The layers, which contain the overhang, i printed in 0,07mm layer hight, the rest with 0,2mm layer hight. The overhang is not really good, but the tracks are working good.