1 / 3
GDSTime 4010 Fan Blades Friction Fit Replacement — zdjęcie 1
1 / 3

GDSTime 4010 Fan Blades Friction Fit Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

GDSTIME style replacement fan blades for 4010 size. Friction fitted design

Ocena
0 / 5
Polubienia
7
Pobrania
48
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you ever stuck your screwdriver the wrong place and broke the 4010 hotend fan blades by accident, give this print a try to fix the blades. 

The design is meant to replicate the original GDSTime fan blades as close as possible. However, due to its friction fitting design, the blades are about 0.8mm shorter than the original ones. 

The print is designed to fit over the original fan drum, so exisiting fan blades are required to be removed. Best result using flush cutters. 

It's also recommended to print this out of ABS especially if you're going to be printing in hotter environment. 

Recommended Print Settings:

  • Layer Height: 0.1mm
  • Wall Count: 4
  • Infill: 100%
  • Wall Ordering: Outside to inside
  • Supports: I used regular support with top interface as close as possible
  • Build Plate Adhesion: Brim

Tagi