GDSTime 4010 Fan Blades Friction Fit Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GDSTIME style replacement fan blades for 4010 size. Friction fitted design
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 48
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you ever stuck your screwdriver the wrong place and broke the 4010 hotend fan blades by accident, give this print a try to fix the blades.
The design is meant to replicate the original GDSTime fan blades as close as possible. However, due to its friction fitting design, the blades are about 0.8mm shorter than the original ones.
The print is designed to fit over the original fan drum, so exisiting fan blades are required to be removed. Best result using flush cutters.
It's also recommended to print this out of ABS especially if you're going to be printing in hotter environment.
Recommended Print Settings:
- Layer Height: 0.1mm
- Wall Count: 4
- Infill: 100%
- Wall Ordering: Outside to inside
- Supports: I used regular support with top interface as close as possible
- Build Plate Adhesion: Brim