Magnetic Tool/Bit Holder for 3DZWMAN Vertical Heat Insert Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds all the tools and accessories for a heat insert press in one magnetic holder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
BOM:
- 6 of 4mm diameter x 2mm magnets
- 9 (or fewer) of 10mm M4 socket head or button head screws
This magnetic holder keeps all the bits and tools for 3DZWMAN heat insert press together.
There are four magnets on the underside to attach to the steel base. There are two magnets on either side to hold the Allen keys for the screws used in the press.
The magnets are friction held by inserting into hexagonal holes, but adding a drop of superglue before inserting does not hurt.
The screws are held by printed thread. The thread is designed to be a bit tight, because the screws are not supposed to turn after installed. If you have a bit of underextrusion. Again, a drop of glue would fix the screws in place if they are too loose (I didn't need to do that with my print).