1 / 5
Magnetic Tool/Bit Holder for 3DZWMAN Vertical Heat Insert Press — image 1
1 / 5

Magnetic Tool/Bit Holder for 3DZWMAN Vertical Heat Insert Press

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds all the tools and accessories for a heat insert press in one magnetic holder.

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
98
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

BOM:

  • 6 of 4mm diameter x 2mm magnets
  • 9 (or fewer) of 10mm M4 socket head or button head screws

This magnetic holder keeps all the bits and tools for 3DZWMAN heat insert press together.

There are four magnets on the underside to attach to the steel base. There are two magnets on either side to hold the Allen keys for the screws used in the press.

The magnets are friction held by inserting into hexagonal holes, but adding a drop of superglue before inserting does not hurt.

The screws are held by printed thread. The thread is designed to be a bit tight, because the screws are not supposed to turn after installed. If you have a  bit of underextrusion. Again, a drop of glue would fix the screws in place if they are too loose (I didn't need to do that with my print).

Tags