Corner Magnet Pad for Lasercutters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a corner piece in various thicknesses, with a flat edge so that you can simply place magnets on it
- Ocena
- 0 / 5
- Polubienia
- 105
- Pobrania
- 218
- Wydruki
- 1
- Wyświetlenia
- 1705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you also have the problem with the laser cutter that your magnets never stick to the corners of the workpiece? Then this quick and easy 3D print is the perfect solution for you. Simply place this part on the corner of your workpiece and you can easily and practically place magnets on the wide edge. Nevertheless, the edge is very thin so that the magnets do not lose their strength. You don't need any specific magnets. I have uploaded the model in different versions for thicknesses from 3mm to 10mm. So there should be something for everyone.
My print settings
- PLA
- 0.2mm
- 15% infill
- supports