1 / 3
XF 23mm F2 WR Extended Lens Hood
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extended hood for the Fujifilm XF 23mm F2 lens that allows clearance for filters.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An extended hood for the Fujifilm XF 23mm F2 lens that allows clearance for filters.
Utilizes the “snap ring” from the original hood.
Unscrew the two screws from the inside of the lens hood and carefully screw those same screws into the print. Be careful not to screw it into the print too much.
I am working on a fully 3D printed version of this and will link it here when complete.