Liczymy pasujące modele…
Rather than the short stubby handle, here's one you can print for use with a long broom handle. The hole is 23.2mm, so its for a (you guessed it) 23mm diameter broom handle with a .2mm clearence. There's also a hole in the back of it…
Wydruk około 5,86 €–7,17 € nettoWstępna wycena jednego wariantu
Simple interface plate with 4 locking lugs on one side and a 17mm ball socket on the other. Quick and simple in PLA, will likely build one in PET-G in coming weeks. Overture Easy Black PLA 6 walls, 25% infill, Exterior to interior…
Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: 3DJake TPU A95 Category: Office
for 23mm handler for big soldering iron made for https://www.printables.com/model/1038915-fully-3d-printed-heat-set-press
Ear expander with 23mm (radius) - I made with Blender to my friend Marlyana, 24mm (border), 23mm (middle) Instructions 100% infill Category: Earrings
If you want to mount your laptop on your Ikea Skadis, now you can print a (I'd like to think of it as a stylish) mount. 3 walls. 25% infill of your liking. PLA should be fine. Needs supports only for the upper pegs in the file…
[PL] Utrzymaj porządek wokół zlewu dzięki temu podwójnemu uchwytowi na gąbki, montowanemu bezpośrednio na kranie! Zaprojektowałem go tak, aby maksymalnie wykorzystać przestrzeń i przyspieszyć schnięcie gąbek. Główne cechy projektu: Dwa…
This is a outer plug for my old fishing rod but you can use in other poles or tubes with Ø23mm innner diameter and 55mm of height, we use flexible 90 Sh from smart materials printed at 220º with prusa mk3s+ I use to repair my fishing rod…
This is a box for a LM2596 converter whose board measures 48mm X 23mm. A quick way to tell if this one will work for you is if by the output positive there are 4 pads arranged in a square. I made this after I realized that not all…
Jednoduchý držák pro lampičku Závit M8 - můžete použít například šrouby: https://www.onpira.cz/zbozi/plastova-upinaci-paka-sroub/ https://www.onpira.cz/zbozi/kovova-upinaci-paka-sroub/…
Model of the 9x23mm Steyr cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…
Like everyone else here, i got excited when i saw the model for my 23mm F2 with the window but was disappointed to see that the model got removed or canceled. When i printed it i noticed that the turning was really tight due to the…
As the original eye post were sized for 26mm eyes, I remixed for smaller one found on Amazon. https://www.amazon.fr/dp/B08CVSF3NJ?psc=1&ref=ppx_yo2ov_dt_b_product_details ) Tested with Joyin's Eye ball 23mm Model is just fitting the eye .…
Model of the 9x23mm Winchester cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
Harder the plastic the better. i have printed it out of ABS, PAHT-CF, and PLA with success.
A protective sleeve for a 23mm brass padlock to reduce banging noises and scratching on surfaces. It fits a padlock with dimensions A-30mm, B-51mm, C-23mm, D-5mm. On the pictures you have v1, but print files are for v2 which allows easier…
These plastic feet are replacement parts for an aluminum household ladder. The aluminum legs are rather thin, and work their way through the original feet, after some time. The result is, that we have the ladder standing on the sharp edge…
Settings I used: Printer: PRUSA MK4 Infill: 15% Layer height: 0.3mm Brim: Yes Supports: Yes Filament: PLA
for 23mm handler for big soldering iron made for https://www.printables.com/model/1038915-fully-3d-printed-heat-set-press
Free loop for GARMIN FORERUNNER 235 watch strap inside size is 23mm by 6.5mm Printed on Creality K1 MAX Used filament from Fil X -- TPR90 Black Nozzle 220 Bed 60 on Creality Smooth PEI plate with hairspray and still was just sticking to…
This comb can be used with left or right hand. I've shortened the handles somewhat as well, making them sturdier. This was quickly done in slicer but I found the fix to be very useful, so I thought I'd put it here. Due to reduced handle…
After my store-bought shower head holder broke, I got fed up with constantly buying replacements, so I decided to design one myself. This custom holder is easy to install and fits perfectly on a 23mm shower rod. Need a different size? No…
V3 - Larger fins for structural strength and stabilization Outer Diameter 23 mm Recommend cutting the model in half about 3/4 up with Prusa Slicer and having denser infill at the top (100%) compared to the bottom (50%-80% Grid). Print…
Everything is printable without supports, print the inserts and Seal out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try…
DO NOT PRINT THIS WITH PLA IT WILL SAG IF YOU USE PLA You'll need four (4) m4 hex nut and some physical persuasion. The tolerance is tight.
Needed a way to mount wires- the wires are 3mm dia. and needed both -tive and +tive. Attaches to the 23mm frame around the bed of the sidexside Included all my different models for my purpose V4 works the best but it has an inner diameter…
I found this design and inparticular the remix the most elegant possiblity to raise the Sonoff SNZB-04 door/window sensor to allow for sensor and magnet aligment. No need for overhangs or support, perfect printing direction for the…
Everything is printable without supports, print the inserts out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling…
Everything is printable without supports. Print the Seal and all the parts labeled “inserts” out of TPU, print the inserts with 0 top layers, 1 perimeter and 10% gyroid infill. Cut the two long inserts to length after printing, they are a…
For those of you who don't care much about taking a lens hood with you, like me, a much more compact version of my case design for the XF 23mm F/1.4 R lens. Everything is printable without supports, print the inserts out of TPU or similar…
This is a really great original design, replacing commercial shower head holders for a fraction of the cost. However I ran into a few difficulties with our heavy showerhead tipping down and a low grip on the vertical riser. The vertical…
The plug is suitable for a hole with a diameter from 19 to 23mm. You can try to resize it.
The measurement refers to the inner diameter of the ring, expressed in millimeters, and is printed on top of it.
Eine Universalhalterung für Wandpaneele der Fa. Bricoman (v.a. gibts die polnischen Baumärkten). Die Maße: Spaltmaß: 23mm // Spalthöhe: 12mm // Leistenbreite: 24mm Gebaut für eine Einschraubmutter M4, um universell Sachen anbauen zu…
The stock lens hood is blocking too much of the OVF on my Fuji Xpro-2, so I made a more compact one. Printed with Prusament ASA, 100% infill for added stiffness. Uses the bayonet part from the original hood. Assembly is super…
A MultiBoard print-in-place broom handle holder for 23-mm diameter objects. This is a simple re-design from my previous version. Based on feedback from AC7SS over at the Multiboard Community, I moved up the Push-Fits to the top edge, so…
EN: This is a sideways sliding cover for 20-23mm (1/2inch) pipe clamps. The clamp must be fully closed for the cover to fit. I have printed it from UV resistant TPU. In the 3MF project file you will also find a mirrored version to slide…
For https://www.thorkracing.com/produto/dmd-remote2/ not perfect but good enough to use with the original (very short) M4 screws.
Usefull for connecting selvyor pump with dishwasher extension hose.
An extended hood for the Fujifilm XF 23mm F2 lens that allows clearance for filters. Utilizes the “snap ring” from the original hood. Unscrew the two screws from the inside of the lens hood and carefully screw those same screws into the…
Da durch kalkhaltiges Wasser meine Grohe-Duschkopfaufnahme immer wieder gern mal bricht, ich aber nicht bereit bin ständig eine komplett neue Duschgarnitur zu kaufen und anzubringen, habe ich mir eine Datei erstellt um diesen Teil selbst…
This is a focusing tab for the manual focus camera lens TTartisan 23mm f/1.4 The ring fits snugly over the focusing barrel and aligns with the grooves for a secure fit. It has a little lip so that it fits into place and doesn't move too…
This model is for users to follow the workflow for 3D Printing in MakeIT Yourself. You are on step # 2 - Get a 3D model file. Next up is step #3 - Prepare the file. Follow the guide for the next steps! This model is originally uploaded to…
Adaptador para antena de 23mm de diámetro, para utilizar en un soporte de pared en L estándar. Aporta robustez y evita que se doble al disponer unicamente un punto de presión.
One note is that the stem is also a different body, so make sure to make that the same color as the keycap (not the letter). I used these on the controllers that I made:…
This is a remix of a file from Thingiverse - I've adjusted the adapter so it fits on the outlet nozzle of a Red Sea Reefer S-850 which has a 23mm outside diameter. The inside diameter of my adapter is 23mm so it's a good friction fit. The…
A bracket that mounts to the plastic mounting option that comes with most bmg clones and is intalled on the backplate of the extruder. Printed it using PETG with 40%infill. V2 should be fine with slightly less infill. !Current Design…
This is a custom adapter ring created for use with the Ambitful teleprompter and the Fujinon XF23mm F2 lens. The stock adapter ring set starts at forty nine millimeters and does not attach securely to this lens. I designed a precisely…
This is extremely specialized and almost certainly only of interest to maybe 3 other people on the planet. But. If you have a Makita router with a 16mm (od) copy ring, and if you have Makita one handed clamps for a Tracksaw track, and if…
Here are two versions of the same lens hood, one with a magnetic cap, the other with a snap-action cap. These have been tested on both the Fujifilm 35mm F2.0 and the Fujifilm 23mm F2.0 lenses. No vignetting has been detected. They are…
Plate of 4x23mm cable labels suitable for Murrplastik 86321020, or label holders supplied with Pepper&Fuchs sensor cables and sensors. The labels are printed with the label side towards the backing, so when using a smooth print pad it is…
Remix of a 5 slot spool holder, should print fine with whatever your preferred settings are. Print top side to the build plate. Shouldn't need supports or brim, I added fillets to the corners to prevent lifting.
Ear expander with 23mm (radius) - I made with Blender to my friend Marlyana, 24mm (border), 23mm (middle) Instructions 100% infill Category: Earrings
A basic remix with a smaller size hole for the handlebars and a bigger holder Category: 3D Printing
Don't print over 2 walls and 30% infill. No Support Is Needed Print 2
If you want to mount your laptop on your Ikea Skadis, now you can print a (I'd like to think of it as a stylish) mount. 3 walls. 25% infill of your liking. PLA should be fine. Needs supports only for the upper pegs in the file…
Small C Clamp with a 23mm opening and 10mm depth. The threads on the bolt are somewhat difficult to get started and tighten but holds firmly. A tool like needle-nose pliers might be needed.
Single Stand for Atomizer 22-23mm Designed with FreeCAD Print Settings Printer: Sintron Prusa I3 Rafts: No Supports: No Resolution: 0,2mm Infill: 20% Category: Organization
[PL] Utrzymaj porządek wokół zlewu dzięki temu podwójnemu uchwytowi na gąbki, montowanemu bezpośrednio na kranie! Zaprojektowałem go tak, aby maksymalnie wykorzystać przestrzeń i przyspieszyć schnięcie gąbek. Główne cechy projektu: Dwa…
This adapts a hand pump with a 23mm-ish male thread, to a 26mm female thread (which is seemingly more of a standard now in 2025?) I had a set of vacuum bags and a hand pump from several years ago. The bags all leak, but the pump is fine.…
this is ~dimensionally accurate bullet casing of the 23mm WWII's Il2 plane deck gun (WJa-23)
21-23 mm works for Husvarna 125 front and back wheel, and also yz250f front wheel. 24-26 mm works for yz250f back wheel. Of course other bikes wheels is going to work to if just the measurement is rigth. 21-23 for example stands for…
Replacement button for a lost one. This one is specifically from a Guess coat. But this button is completely versatile. You can use all kinds of materials and colors.
Universal lock holder for the Xiaomi M365 and M365 Pro scooters. Supports different lock diameters (20 mm / 23 mm) and allows easy installation without disassembling the scooter or steering assembly. Required Hardware 4× M4 nuts 4× M4…
Useful for profiles that are 23mm wide and have holding groove at ~5mm. I've used PETG for the bit of flexibility and it holds quite snug. No need for supports. Print sideways to prevent stress on the layer-lines.
Print vertical and one half at a time for better layer resolution and minimizing stringing if printed on FDM. Not tested. More updates to come.
🇬🇧 This functional cap effectively protects the end grain of 47x23mm trellis wood battens from rain and moisture, drastically extending the material's lifespan. Optimized for garden and landscaping structures. Technical Specifications &…
Adapted base for a Quickmill (820) portafilter, which has a flat top, this avoids spilling coffee over the edge.
I am using the original model for my headphones, but my colleagues asked me to print a different version for their tables. So as part of learning with Tinkercad, I adjusted the original model to different table thicknesses. It can be used…
I created this adapter since Tamiya and Mr. Hobby paint bottle's are to wide. This adapter keeps the bottle centered in place and creates an excellent vortex in the bottles. Tested to 3,000 RPM!
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
A washer for hood-pad retainers that need a bigger OD when the pad hole gets blown out.
Remixed to fit on an XYZPrinting Da Vinci Jr 1.0 Pro. Legs have been shortened, but all other dimensions remain the same
This is mostly inspired of very nice project I found on Thingiverse by d23elt05a I liked it but it didn't fit my rod. PETG / ABS recommended PLA is not recommended to be used with water for a long time (but for short time it will be ok)…
Please leave a like if you decide to download :) Printed with wood type PLA filament. No glue needed, the cap pushes onto the head of the screw and fits snug. The hole for the screw is already there so no need to drill any holes.…
I had a box and metallic bar to make a drybox for filament spool so I designed some supports. Note that they are angled, not vertical. if you need and other angle I upload solidworks file or just tell me)) Category: 3D Printer Accessories
Download NewLeg v2x2_Front and NewLeg v2x2_Back put in cura and use supports. Printed with 0.5 nozzle and 0.2 layer height. Don't forget to put rubbers.
2x1 Tray with an open side for more combinations of storage.
2x1 tray with single opening for more combinations of storage
2x2 tray with single opening for more combinations of storage
1x1 tray with single opening for more combinations of storage
Needed a holder for my Kobalt screwdriver, 23mm opening.
This is a remix from https://www.thingiverse.com/thing:2006800 . I needed a 23mm leg extension for the Ikea Jokkmokk table, to match the height of the shelf (Ikea Expedit) next to it. Print Settings Printer Brand: Creality Printer: CR-10…
https://vespa-riviera.ch/ Entonnoir / Funnel diam 120 to 23mm Print instructions Category: Household Summary https://vespa-riviera.ch/ Entonnoir / Funnel diam 120 to 23mm
