BTT Bigtree Tech SFS V2 Smart Filament Sensor 2020 Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a BTT Bigtree Tech SFS V2 Smart Filament Sensor Mounting Bracket for most 2020 or other type framed printers
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to mount a BTT Bigtree Tech SFS V2 Smart Filament Sensor onto my Voron Trident printer. It should work with many other types of printers too, if they are based on the common aluminium extrusion many printers are made with.
The mounting screws shipped with the SFS can be used to mount it to the bracket. Also, the connector position is reversible as shown in the two different mounting locations.
I've also included the FreeCAD file. This is a modded file from a previous Bowden Tube holder that I had drawn up so it isn't tremendously efficient in workflow!
You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 & https://www.printables.com/@JimChristian_3198049/models They work well :-)
Also, if you find value in this, please give it a like. Thanks.