1 / 5
Nikon F / F2 Remote Terminal Cap; Abdeckung Fernsteuerung MD-1 MD-2 S36 Motor Drive — zdjęcie 1
1 / 5

Nikon F / F2 Remote Terminal Cap; Abdeckung Fernsteuerung MD-1 MD-2 S36 Motor Drive

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nikon F / F2 Remote Terminal Cap; Abdeckung Fernsteuerung MD-1 MD-2 S36 Motor Drive

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
112
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Abdeckkappe für den Fernsteuerungsanschluß an Nikon MD-1, MD-2 für die Nikon F2 oder die letzte Version des S36 Motorantriebes für Nikon F.
Könnte auch noch an F3 Motor MD-4 bzw. an den Motoren für die FM oder FE den MD-11 und den MD-12 passen. Falls es jemand ausprobiert freue ich mich über eine Rückmeldung.
Das Gewinde ist ein metrisches Feingewind M9 x 05.
Mit Layerhöhe 0,1 oder niedriger drucken damit das Gewinde gut ausgeform wird.
Die rote Kappe wurde mit Jayo PLA+ gedruckt und die blaue mit Jayo PETG.
……………..
Cover cap for the remote control connection on the Nikon MD-1, MD-2 for the Nikon F2, or the latest version of the S36 motor drive for the Nikon F.
It could also fit the F3 motor, MD-4, or the motors for the FM or FE, the MD-11, and the MD-12. If anyone tries it out, I'd be happy to hear your feedback.
The thread is a metric fine thread M9 x 0.5.
Print with a layer height of 0.1 or lower to ensure the thread is properly formed.
The red cap was printed with Jayo PLA+ and the blue one with Jayo PETG.

Tagi