1 / 3
filament guide vslot PC4 PTFE tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament guide for my Kingroon KP3S, but will work with any vslot.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 91
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed some filament guides for V-slot using PC4 mounts(M6 and M10).
Printed with ASA, but any material will be good,
0.24mm, 3 walls, 30% infill, no supports needed.
Should be printed lying like on photo.
Works with 2020, 2040, 4040 profiles.
BOM:
- PC4 mount - M6 or M10
- M5 x 10 screw
- any Vslot nut
