Cable Clips for 2020 Aluminum Extrusion (Twist-in, Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Twist-in multi-size cable management compatible with 20mm x 20mm T-Slot or V-Slot aluminum extrusion
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 341
- Wydruki
- 3
- Wyświetlenia
- 620
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tested a bunch of cable clips and the model I found at https://www.thingiverse.com/thing:2613532 was my favorite. It requires some force (pliers help) to twist into place, but once there it holds firm. It's got a flexible arm so cables can be added after it's in place.
I modeled a similar version from scratch and parameterized it in Autodesk Fusion so it can be tweaked for different applications. Need to manage bigger cables? Change the height parameter. Want it less flexible? Can do, up the wall thickness. Slightly too big or to small to fit snug into your extrusion profile? Adjust parameters for the neck, slot portion, etc.
There are also some modifications made. It's now a solid part with customizable infill if desired. There are rounded edges all over. The lip to keep cables inside the loop is more pronounced. The base is larger to help provide a larger surface to twist it into place.
This fits well in the cheap aluminum extrusion I got off Amazon, see photos for dimensions ($50USD for 10 meters of 2020 in 1 meter pieces). I ordered a second set of extrusion and its dimensions were different, everything was thinner, so the pliers-tight model was extremely loose. To address this, I added a 1.65mm model that fits tightly in that thin-walled extrusion but doesn't fit at all in the original extrusion.
Files:
STL with 1.8mm gap and three sizes of clip for a tightly fitting part requiring pliers to twist into place, but will hold its position firmly
STL with 1.875mm gap and three sizes of clip for a looser fit that can be moved around more easily and twisted into place by hand
STLs for each size with the tight-fitting 1.8mm gap
Autodesk Fusion file with parameterized dimensions for easy customization to match different sizes of 2020 extrusion
Printer settings:
PLA works great
No supports needed
If there are bed adhesion issues, there are a few solutions. Try printing one at a time, using a brim, or slowing down print speed and travel. Try changing the first layer width and height to 150%, as well as increasing bed temperature and nozzle temperature
For added strength, change the perimeter wall thickness to 20 and change the top and bottom fill to zero, so the wall thickness carries all the way from bottom to top and all the way through the part. For hollow parts, I used 10% Gyroid infill with good success
I tested with 0.1mm and 0.2mm layer height, both were fine
Tested on an AnkerMake M5 and Ender 3
Parametric settings:
The Autodesk Fusion .f3d file has a number of parameters to customize within the Modify>Change Parameters window
TwistHeight represents how thick the outer metal is. 1.8mm is good for pliers, 1.875mm and you might be able to use your fingers to twist into position
NotchTopWidth represents the widest part inside the slot. 9.75mm works well, any larger and the part may not actually be able to twist after inserting
TwistDiameter represents the diameter of the circular “neck” that connects the notch to the exterior. 5.75mm works well
CableHeight (tall, medium, short) define the sizes of the three parts in the file, specifically how much room there is for cables inside the retention