3.5mm to 6.35mm Headphone Adapter Spacer – 1mm Offset
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to offset 3.5mm plugs by 1mm in 6.35mm adapters—fixes poor contact and audio issues.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple 3D printable spacer designed for 3.5mm female to 6.35mm male headphone adapters that require the 3.5mm plug to sit slightly back—about 1mm—to maintain proper contact and avoid audio issues.
Some adapters have tolerances or contact designs that cause poor signal or distorted audio when the plug is fully inserted. This spacer prevents full insertion by adding a 1.2mm mechanical offset. Simply slide it over the 3.5mm plug before inserting into the adapter.
Print settings:
No supports needed
Layer height: 0.2mm
Infill: 100% (or solid)
Material: PLA, PETG, TPU (recommended for slight flexibility)