Behringer Semi-Modular 2-Tier Stand for Jaspers Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand that securely mounts 2 Behringer semi-modular synths to a Jaspers keyboard stand.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
The Behringer semi-modular synthesizers are great if you're rack mounting them, but their form factor isn't exactly conducive to having an organized desk. The logical decision is to go vertical and switch to a tiered stand, but I decided to ditch the desk and move the whole setup to a Jaspers keyboard stand.
This stand is compatible with a variety of different Behringer synths such as the Model D, CAT, PRO-1, PRO-800, Neutron, Proton, etc. but you'll need to ensure both synths you're mounting are the same width.
To install the stand onto your Behringer semi-modular synth of choice, you'll need to remove the 2 wooden side panels. The printed parts replace the side panels and are held in place with the original hardware. The bottoms of the stand halves are secured to the Jaspers "Holders" (Halter) accessory with 2x 2.5mm wide zip ties on each side. The 220mm long Jaspers Holders 22B/S work best with this stand, but any of the longer Jaspers Holders will also work.
I've included files for 2-part halves that can be printed on the Prusa MK3/4S, as well as the complete halves that can be printed on printers that have larger build volumes.