Cap for John Deere Caster Spindle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A press fit cap for John Deere Ztrak 700, 800, 900 series zero turn mower front caster wheel spindles
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I lost one of the caps that cover the caster spindles on our Ztrak Z930M commercial mower. I had apparently injected an excessive amount of grease & that had pressurized the air under the cap. The pressure caused the cap to pop off while mowing.
These caps sell for about $4 each at the dealership or online. Not very pricey, but I drew up and printed a replacement for use until I could get around to buying a real one.
This part has to have a tight fit for retention. The model I printed was installed using a dead-blow hammer, handy for applying force with less risk of breakage. Once seated, it stays in place.
I printed in ASA for UV & temperature stability, using a 0.6mm nozzle & 0.3mm layer height.
Fusion 360 source & .STEP files are provided along with the .STL.
No supports needed for printing.