1 / 5
ZOHD Dart 250g Rear Cover/Hatch — zdjęcie 1
1 / 5

ZOHD Dart 250g Rear Cover/Hatch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A thin light weight rear cover for the ZOHD Dart 250G

Ocena
0 / 5
Polubienia
2
Pobrania
47
Wydruki
0
Wyświetlenia
370
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Features:

  • Lightweight design
  • Accommodates SMA pigtail with or without base
  • Rear mounting hole for single M2 attachment screw and anchor nut
  • Hexagonal holes for cooling

Hardware:

  • 1× M2x4 screw (rear mount)
  • 1× SMA base plate with 2x M2 screws (optional)

Installation Note:
The included lightweight anchor nut should be glued in place, aligned with the aft mounting hole.

Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.

Filament: PLA 

Tagi