Core One Side Storage bottom low Box / Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Core One Side Storage bottom low Box / Tray with magnet mount
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 189
- Wydruki
- 9
- Wyświetlenia
- 1114
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bottom low Tray with magnet mount for the Prusa Core One Side Storage from Prusa Guy
Printing recommendation: PETG, 0.4 nozzle, 0.2mm speed, no supports
For assembly you need:
2x magnet 12x6x3 (the magnet can be 12 to 15mm long)
Attachment: Be aware that the magnets have to be aligned with the magnets of the box.
Place the two magnets in the left and right bottom back corner and turn them until they are held by the magnet behind them (see picture below)
Place the box in front of the side storage in mounting direction. Remove the magnets from the corner without twisting them and press them into the corresponding recess in the tray.
Put the tray into the side storage.