Pocket sized print-in-place magnetic container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Initially sized for q-tips or brush-ups, but can be used for all kinds of things.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
General:
A simple magnetic closure print in place container.
Why I designed this:
I wanted to keep Q-tips in the car without them getting filthy, and to play with print in place hinges while I was at it.
Printing notes:
Layer height: .15 or finer is ideal, but aesthetic only
Recommended Material: PLA or better
Supports: None
Infill: 15% Gyroid or triangle
Walls: 2-3
Other Modifiers: Print as oriented
Material Quantity: ≈27grams
I printed from PLA on Centauri Carbon at .16 layer height with 15% rectilinear infill and 2 walls.
Magnets are a tight press fit, 2X Ø5mm, 2-3mm thickness should work, but it has only been tested with 2mm thickness so far.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out:
https://fabtechmfg.square.site/