1 / 8
Prusa XL PSU Dual USB Charging Port Mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds two 5V 1A USB Type-A charging ports to Prusa PSU
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
- 2CH USB Charging Port Module is:
- Replace both 1206 fuses on 2CH USB Module from 4A (marking S) to 0.25A. This is to ensure we can't draw more than ~1A from each port, and in the scenario we do then the fuse will blow. The math is:
- Output power per USB port: 5V * 1A = 5W.
- Input power per USB port: 5W / 90% efficiency = 5.6W.
- Input current per USB port: 5.6W / 24V = 0.23A, nearest fuse is 0.25A which also gives a bit of headroom.
- I used Littelfuse 0437.250WR:
- Cover the exposed TH leads with electrical/Kapton tape to make sure they don't short on the painted sheet metal.
- USB Type-A to USB-C right up angle adapter:
- Mounts screws are:
- M3x6 Button Head Hex, 4pcs.