1 / 8
Prusa XL PSU Dual USB Charging Port Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds two 5V 1A USB Type-A charging ports to Prusa PSU
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 25
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
- 2CH USB Charging Port Module is:
- Replace both 1206 fuses on 2CH USB Module from 4A (marking S) to 0.25A. This is to ensure we can't draw more than ~1A from each port, and in the scenario we do then the fuse will blow. The math is:
- Output power per USB port: 5V * 1A = 5W.
- Input power per USB port: 5W / 90% efficiency = 5.6W.
- Input current per USB port: 5.6W / 24V = 0.23A, nearest fuse is 0.25A which also gives a bit of headroom.
- I used Littelfuse 0437.250WR:
- Cover the exposed TH leads with electrical/Kapton tape to make sure they don't short on the painted sheet metal.
- USB Type-A to USB-C right up angle adapter:
- Mounts screws are:
- M3x6 Button Head Hex, 4pcs.