354 models
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
Custom stand I designed to hold/display my M1911 Pistol collection. Designed using Fusion 360 and sliced with Prusaslicer. Final design holds pistol in a level attitude and shows off the pistol nicely.
Print approx. €6.18–€7.55 excl. taxPreliminary estimate for one variant
Description Digital File to DIY 3D print a Wall or VESA Mount for Technicolor Xi6 (Videotron Helix) TV Terminal. Model match terminal design line. The mount can be screw to wall or at the rear of TV using VESA 50x50 or VESA 75x35 holes.…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
PVS-31A Night Vision Specs Adjustable you can use the supplied printed rods to attach the lenses or use a long bolt and nut. Use HollowSpecs. For hollowed out lenses. (you can see through them)
Print approx. €11.59–€14.17 excl. taxPreliminary estimate for one variant
After evaluating by our clinicaluser we added a mountaing for a headband so that the mask would not slide down.
Case for Raspberry Pi 1A+ / 3A+ with mounting solution for the Raspberry Pi High Quality (HQ) Camera. The CSI cable is contained withing the case. Features: compatible Raspberry Pi A+ and 3A+ Mounting for Raspberry Pi Camera HQ CSI cable…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
A Wall sign featuring the M41A Pulse Rifle as seen in the movie Aliens, featuring the text seen on the T-Shirt of the character ‘Frost’ stating ‘Peace Through Superior Firepower’ Colour change required at 3mm
Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant
Materiál - PLA, PolyAir infill 100%
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
THANK YOU ALL FOR 1700+ DOWNLOADS! I never thought this would get this much attention let alone that many downloads. 2023 has been a turbulent year for me, I started 3D printing, moved far away from my hometown and had many troubles to…
You'll have to excuse the part names, I didn't know the correct technical term for most of them… I made this model as the others available online weren't all split by color and were over complicated in the number of parts (some containig…
Awesome model created by PaulElderDesign https://www.thingiverse.com/thing:1693443 You find PaulElderDesign over on Etzy I liked it so much I've scaled it up to fit my printer. I have stripped back the pieces to allow for easy printing in…
This is a remix of https://www.thingiverse.com/thing:4718232 Print at 0.12mm layer height with supports on build plate. Assembly instructions (See images below for reference): Remove support block from under the back of "Turret Top.stl"…
NEW MODEL HERE: https://www.printables.com/model/695019-m1a2-abrams-sep-redux 1:42 Scale M1A2 Abrams Modeled in Fusion 360 The M1 Abrams is a third-generation American main battle tank designed by Chrysler Defense (now General Dynamics…
M1A1 Abrams Tank Model A detailed 3D model of the M1A1 Abrams tank. The turret can rotate, and the parts must be glued together. Scale 1:72
A beautiful flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 98mm wide. Print time approximately 3 hours with a single wall. The photo shows the vase printed in vase mode. It can be printed in normal…
This is my 1911 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
Version 1.1: Noch ein paar kleine Updates. Beim Exportieren der Teile habe ich ein Paar Kleinteile Verwechselt. Im genauen sind es. Kategorie Lenkung hinzugefügt: Zwischenlenker_Rahmen_1 Zwischenlenker_Rahmen_2…
Geeignet für kleine Mengen zum umspulen. Es lassen sich alle gängigen Größen montieren auf der Antriebswelle. Das Testgewinde ist gedacht für die Richtige Scalierung vom Gewinde. Ich musse x und y auf 98% setzen im Slicer. Z darf…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
This is primarily a remix of the turret of hushhushrat's leo1a5. I did my best to correct and add detail. Particularly the mantlet needed a lot of modification. I also separated the turret and tank body. Should print well at 1:100 scale…
Build Guide: https://props3d.pro/aliens-pulse-rifle/ Join me and fellow prop makers on Discord and join in some build projects: https://discord.gg/NGWhc6a3Gv Note that like most of my things they're iterative. I'm an eternal tinkerer and…
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
Model of 1A tensile test specimens according to ISO 527-2 standard.
This is my first personal 3d model so sorry if there are any issues. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Props
OUTDATED CHECK MY PROFILE FOR NEW MODEL
LEGACY MODEL >This is a model which I don't want to take down simply because it is not mine. I will eventually get to 3D modeling my own 3D model, but for the sake of this accounts legacy, I am updating its Thumbnail, and keeping it up.…
I Wanted to double sided tape it so I needed a version without the reinforcement behind. So I've slice it in PrusaSlicer. And I've print it at 102% (When you play with scale more than once in prusaSlicer this scale add up! be sure to…
A tight-fitting mesh for a Type-C USB 5V 1A 18650 TP4056 Lithium Battery Charger Drop it into your model and the component fits so snugly in the recess that you don't need anything else to keep it in place
This is a Li-ion charger compatible with 18650 and 21700 cells. Charges up to 10 cells. requires a 5v power supply at least 10A. I recommend 15A to avoid overheating. Each cell has its independent charging module TP4056 or TC4056. The…
Created this holder to holster my Springfield Arms 1911A1, chambered in .45ACP. It's meant to mount under a desk, and hold the gun securely. Printed in PLA, at 25% infill with 3 walls. It fits snugly when inserted all the way (giggity)…
BIC Lighter Sleeve Cover Studio 1A - Cover accendino BIC Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the…
The combat operations of the early 2000s with Operation Iraqi Freedom showcased that the M1A2 System Enhancement Package (SEP) still had rooms for improvements. Combat-oriented upgrades such as the Tank Urban Survival Kit (TUSK) I and II…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Messerschmitt is very realistic Print in place kit card , Assembly required
Supressor for airsoft guns . made for SCORPION EVO 3-A1 Specs: Size : X 38 × Y 38 × Z 175 mm Screw size 18mm Printed on bambulab p1p Please if you make it please upload your make
I'm posting the latest version of my design, as file update on an existing model seems broken… So disregard the other design as it is now missing some files… This new version has a simpler sun gear output axle (no screws, one single part…
Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. ---------------------------------------------------------------------------------------------------------- It was pointed out to…
I redesigned my model of the Abrams, in many ways. First, the tracks and hull were split for easy printing, and the turret rotation has a better mechanism. Next, I made it modular, but adding options for addon armor. There are options for…
Simple wall mount for the Unifi 60W power brick delivered with the Unifi Cloud Gateway Fiber. Works best in PLA due to it's rigidity, requires supports (tree is best) for the clips. Uses 2 3.5mm countersunk screws to fix it to the wall.…
Ever wish Snap On made that color screw driver you want oh so badly with the comfortable grips they have to offer? Lose or damage one of your screwdrivers in your Snap On set they no longer produce? Well, I am both of the above and here I…
Click here to download RIGHT SIDE belt tensioner
This model is compatible with the lego system.
This bracket mounts your BlueSCSI 1.1a in your vintage Macintosh hard drive bay. It uses the original hard drive mounting screws, and has a small tray to aide in removing and installing the microSD card. Compatibility This bracket should…
The Armat M41A Pulse Rifle is a pulse-action assault rifle chambered for 10×24mm Caseless ammunition. It was notably employed by the United States Colonial Marine Corps and the United States Army as their primary infantry weapon during…
This wall hanger is an addition to the great M41a Pulse Rifle model. https://www.printables.com/pl/model/598119-aliens-m41a-pulse-rifle I created two versions, one prepared for sticking to the wall using, double-sided tape montage glue.…
This bracket mounts your BlueSCSI 1.1a inside your Macintosh SE or SE/30. The microSD card remains accessible from the outside of the machine, and a light pipe helps you see what the status of the BlueSCSI is. Indicators on the bracket…
I modified the middle section to add electronics. The ammo counter on the pulse rifle is currently a static display, powered directly to light up but without any functional programming or interaction. HDSP-K121 - dimensions 25,146 x 17,02…
Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. Replaced the original Robomow wheel SPP7021A. The two extra holes would be for an aditional hubcap. Looks like a tractor tyre with…
This is a conversion for the HG M1 Astray into the space-based counterpart from Gundam seed MSV and Astray manga. The rifle does fit the normal hand, however, I have made my own with a wrist joint to help with holding. Category: Model…
The M1A2 SEP (System Enhancement Package) is an upgraded M1A2 Abrams. Its most significant upgrades is the better thermal sights for not only the gunner and commander, but also the driver as well who previously only had access to night…
Before I started designing, I had set myself the following goals. It should be as small as possible, but still have all-wheel drive and have suspensions. Of course, it also has to consist largely of 3D-printed parts. If you want to learn…
WW2 M1A1 Anti Tank mine. This is a large print, 1:1 scale I've included files so it can be printed as a complete unit or be printed in its parts like a real one. If you print this please post a make. Category: Sport & Outdoors
This model is compatible with the lego system.
To hide the cables of a Reolink RLC-811A and the conduit coming out of the wall, I needed a suitable surface-mounted junction box. There are two versions: round square (tested) The square version was tested and fits perfectly. Printer…
The print turned out great but please ignore my paint job. 0.2mm layer height (I don't even own a Prusa but I love Printables), supports (touching build plate only), requires a bit of sanding depending on your printers cooling. Enjoy!
Pretty much self-explanatory. Attach to the side of a Yaesu FT991 to protect the knobs and rear panel connectors and give the radio a more solid footing. Uses four (4) 4mm x 20mm flat head screws. If you have a large enough printer, print…
M41A Bullet scaled to fit the M41A Pulse Rifle Model
Upgrade your vintage Macintosh with the BlueSCSI v2 DB25 Hard Drive Emulator. Designed to fit all Macintosh DB25 SCSI external buses, this compact and sleek emulator replaces bulky, outdated SCSI hard drives with modern, reliable storage.…
This model is a Reolink RLC-811A Camera Mount for 5" Dutchlap Vinyl Siding. It will print with no supports. I needed a sturdy mount for outdoor use so I printed with 4 perimeters and 4 top and bottom layers out of ASA. Mounting hardware:…
A detailed model of a M1A1 Abrams Would Not Recomend printing this model small.
This model is compatible with the lego system.
A stand designed to fit the M41A model with the Colonial Marines Logo Engraved
A simple holder for 2 MSF 1A gas cartridges as used in many table-top stoves. I recommend using screws made of a stainless material for the attachment. You can also apply double-sided adhesive tape to the back. Then it should be really…
I printed this model on the XL as a multi color print (2 tools), now the regular bullets can be printed on any printer as a color change but the split round can only be done with a printer capable of printing multiple colors on a single…
This .3mf file contains three Raspberry Pi Case Designs. one for the Pi 1B and A models, one for the Pi 1A+ and 3A+ and one for all other Model B revisions (1B+/2/3/3B+/4/5) There is also a case for the Raspberry Pi Zero and Zero 2W. a…
This compact and practical enclosure is designed to fit the CH341A Pro programmer perfectly. The enclosure should fit the CH347 programmer. It protects the device against accidental damage while maintaining full access to all ports and…
Mit diesen Teilen kann der 8X8 als 6X6 gebaut werden. Rahmenteile werden benötigt. Ich habe das Getriebe extra nicht berücksichtigt da ich keine Maße habe. Den platz muss sich leider jeder selbst suchen und die entsprechenden Löcher…
No PLA, better PETG. Nozzle 0.25mm, layer height 0.1mm. No support.
The CatTouch control-display for Yaesu radios from Catmeters.com is awesome. But I wanted a case that tucked up under the SP-10 Speaker a little better. This is what I came up with. This design is “screwless”. The Boards just snap into…
This is a detail set for the 1/144 M61A5 from the Zaku ground war set. With this you get a new turret bustle, 2 mg, smoke lunchers, recognition panels, and a mine plough.
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
18mm from holes. Print ABS/ASA with 30-40% infill. Supports may needed. In printer.cfg use x offset=-33,y=-5. 260,295mm(for K1Max). Maybe u can change differently. My Z-offset= 1.6 on Volcano brass Trianglelab nozzle 28.02.24 UPD: more…
This is a set of side rails intended to provide protection for an FT-991a radio. I have used the original project files from here: https://www.thingiverse.com/thing:4750064 and cut them in half to allow them to print on a Prusa Mini.…
This model is compatible with the lego system.
This is my modified version of the pump action shotgun for Prop3DPros BEAUTIFUL M41A Pulse Rifle. I wanted a bolt action when you use the pump. YOu will find full instructions on how to build this at the following link. Let me know if…
A slight variation of “Christmas Tree Desk Ornament 01”. In this one I removed the thin walls inbetween the frames to make it more transparent and structural. Dimensions (cone): 40mm internal radius at base, 150mm height. If you do decide…
Here is a replacement part for any microwave that has a standard Ø 180 mm 5889W1A012A turntable. It's commonly used in budget devices. All you'll need is a T10-T20 torx screwdriver for the assembly. Tip : print the sample test first to…
This model is compatible with the lego system.
Benötigte Teile um den 8X8 Kat in einen 4X4 zu erstellen. ( https://www.printables.com/de/model/492533-man-kat-1a11-v10-25112023 ) Ich habe das Getriebe extra nicht berücksichtigt da ich keine Maße habe. Den platz muss sich leider jeder…
Front cover for Yaesu FT-991/A The scaled stl file is a slightly snug fit the not scaled version is better with foam draft excluder tape to make it a nice snug fit. Fusion 360 file included . if you re-mix it please post as such. Have fun…
Replaces ceiling vents in VW Vanagon and Synchro vans, made to same dimensions as original vents. Materials Printed components and original mounting screws Assembly Align the Vent flaps and attach them to the linkage plate, putting the…
-Printed with 15%infil with PETG or ABS(PLA gets too hot in the sun and deforms/cracks under recoil) -4mm roof/walls Slightly oversized so it needs a slight sanding to get it perfectly flush
A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…
I wanted to create a housing for the Peerless by Tymphany PLS-P830984 Speaker to use it next to my Yaesu FT991A. The Yaesu SP10 for 100 bucks seems to be very bad so I researched and bought that speaker. Its an easy box, definitely much…
took to long to export so did it seperatly
Orion Fan OD4010-24HB01A with tachometer. Frame dimension is accurate since it is a 3D model from manufacturer.
I modeled these rails after the FT-817/818 rails commonly used for full duplex satellites. As far as I know the TM-V71A is the most compact 50W full duplex mobile radio and is commonly used for satellite operation. I wanted to take mine…
Step files included so mod to your heart's content: So this items is 3 separate things, a bracket that the under barrel of Andrew's awesome design rests on (behind the pump) and the other square bracket is designed to hold the body behind…
The New version 3.2 is available here
I had the best results with PETG 0,2mm layer height.
Dies ist ein Adapter für die Reolink RLC-811A Kameras. Dieser Adapter wird an eine tiefe Standard-Unterputzdose mit Dosenschrauben angeschraubt. Anschließend wird die Reolink RLC-811A Kamera montiert. Stützen werden keine benötigt. Diesen…
This is an adapter that allows you to mount optical probes (e.g., Tasmota or FRITZ!Smart Energy 250) onto an Easymeter electricity meter. It is compatible with meters of the Q1A and Q3A series and supports both the info interface and the…
If you are missing the metal hard drive bracket for your Macintosh LC-series computer, this bracket mounts your BlueSCSI 1.1a in your vintage Macintosh LC-series computer's hard drive bay. If you have the stock metal bracket, then my…
Boitier routeur solaire F1ATB A imprimer de préférence en ABS ou PETG Modélisation by Jps06 que je remercie grandement !
Dies ist das Set 1ab , schaut auch gerne meine Kollektion an, dort findet ihr weitere, passende Sets. In dem Set sind 2 Varianten auf der Druckplatte enthalten: schmale Konturen breite Konturen Nicht vergessen: einzigartiges Design keine…
