Gridfinity 5x2 Skadis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a 5x2 gridfinity skadis mount for the Rugged Screw Unit (from another site). None of them fit quite right so..
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to mount the Rugged Screw Unit from @K2_Kevin to my Skadis pegboard. I didn't find one that was 5x2 and was strong enough, to support the weight of a loaded srew organizer, so I designed my own. I designed it to:
- Use minimal material.
- Be capable of adding magnets if needed.
- Be strong enough to support the weight of a fully loaded screw organizer.
- Print quickly.
- Require minimal support to print.
I see that there is now a 5x3 Rugged Screw Unit available as well. If requested, I can remix this to add a 5x3 variant or other sizes if needed.
I printed this using Elegoo PLA+ on my Bambu Labs P1S using the following settings:
- Layer Height: 0.20mm
- Arc Fitting: On
- Wall Loops: 4
- Top and Bottom Shell Layers: 4
- Sparse Infill Density: 15%
- Sparse Infill Pattern: Cross Hatch
- Enable Support: On
- Support Type: Normal(auto)
- Support Style: Snug
These settings worked well for me, but you can adjust as you see fit. This only used 82.39g of filament so I didn't see any reason to optimize it any further.
Please let me know if you have any feedback on this design!