1 / 18
Anycubic Kobra S1 Hotend Cover + Fan Duct WIP UPDATE — zdjęcie 1
1 / 18

Anycubic Kobra S1 Hotend Cover + Fan Duct WIP UPDATE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade your Kobra S1 Appearance!

Ocena
4,636 / 5
Polubienia
384
Pobrania
3660
Wydruki
12
Wyświetlenia
12 179
Oceny
11

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Now you can upgrade your Kobra S1 with colourful, personalised Fan covers! + Duct

Update1: Many tolerances and small details fixed, added hooks for the Duct, added Duct and tested both for compatibility and durability. i recommend using the new files for best results.

 

Everything is made to be cross-compatible with the Original Fan, Screws, Duct. just print and assemble it.

 

-you may want to prime the holes with a hot screw very careful first. (I used a lighter and a screw taped to a screwdriver)

-The Walls are very thin, and the standoffs break easily with too much force before fan and duct are assembled.

 

For now I modeled it to be as close to the Original as possible, even the weight of the Coveris almost the same at ~30g I might add a more Print-friendly version in the future.

I printed the Prototype in PLA and for PLA-Prints it worked just fine in my tests. I use a textured build plate, that makes the shiny pattern.

 

More models and Logos to come. Let me know in the comments, what you like to see next, I might add it to the files soon. :)

 

Clicks into place easily and doesn't get loose by itself:

 

 

Tagi