1 / 4
Clamp an Aluminum Extrusion 2020 at the Edge of Your Desk (STL and FreeCAD source)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix your 3D-printer at the edge of your desk with this set of clamps and M16 set screws.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Desk thickness (default: 31 mm) is an adjustable parameter in FreeCAD source.
Requirements:
- Clamps
- M16 x 15 set screws
- M5 x 15 screws
- M5 washers
- M5 T-nuts
8 mm hex Allen key is here and there: