Biqu Microprobe Mount (E34M1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for attaching the Biqu Microprobe to the E34M1 toolhead.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I only found one mount for the Biqu Microprobe and E34M1 toolhead. But after installing it and calibrating, I found that it didn't quite have the mounting range I needed (since it was designed for a different toolhead I assume), and also added width to the toolhead than I wanted. So I started from scratch and made my own in similar style (currently used and tested with the Phaetus Dragonfly BMO and TriangleLabs Rapido ACE).
This mount, I feel, offers several improvements:
- a slightly larger mounting surface for the probe, extending farther over the pcb and connector on the back
- rotates the probe mount to make the toolhead more compact
- extends the toolhead mounting slots to provide more range of adjustment
- uses m2.5x4mm heatset inserts ('cause no one likes using those little m2.5 nuts)
- bracing for rigidity
I've also uploaded both a .step and .sldprt file for people who want to remix.