1 / 4
ATX power supply bay for MODCASE MASS Premium
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ATX power supply expansion module for MASS Premium. Easy print.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (33)Powiązane
Description
Additional module for MASS Premium allowing to use cheaper and better available ATX power supplies.
Features
- Tested with
140mmand150mmATX power supply - Using with
160mmshould be possible, but challenging. May require to insert power supply during cage assembly Flipversion has fan facing up- Uses clips from the original design - not included here!
- Same M3 20mm screws as the original MASS
Printing
- Use the same settings as with MASS (
0.2mm,5 walls,5 top/bottom,20% infill) - Front and side panels are multi-body pieces. Set
no wall,no top/bottom,40% grid infillfor MESH bodies. Do not move bodies! - All parts are already oriented for easy printing.
- No support needed.
- PETG recommended.
Remarks
- I made a sandwichof (bottom to top): 2x HDD bay, ATX power supply, fan, main module, fan. Picture included.
- I switch HDD bays with the fan under the disks. All four of my fans blow upward.
- I designed a special blank (to be published later) to mount the module, converting 8-pin PCIe power to HDD power instead of the original SFX power supply.