1 / 4
ATX power supply bay for MODCASE MASS Premium
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ATX power supply expansion module for MASS Premium. Easy print.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 87
- Makes
- 0
- Views
- 619
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Additional module for MASS Premium allowing to use cheaper and better available ATX power supplies.
Features
- Tested with
140mmand150mmATX power supply - Using with
160mmshould be possible, but challenging. May require to insert power supply during cage assembly Flipversion has fan facing up- Uses clips from the original design - not included here!
- Same M3 20mm screws as the original MASS
Printing
- Use the same settings as with MASS (
0.2mm,5 walls,5 top/bottom,20% infill) - Front and side panels are multi-body pieces. Set
no wall,no top/bottom,40% grid infillfor MESH bodies. Do not move bodies! - All parts are already oriented for easy printing.
- No support needed.
- PETG recommended.
Remarks
- I made a sandwichof (bottom to top): 2x HDD bay, ATX power supply, fan, main module, fan. Picture included.
- I switch HDD bays with the fan under the disks. All four of my fans blow upward.
- I designed a special blank (to be published later) to mount the module, converting 8-pin PCIe power to HDD power instead of the original SFX power supply.