1 / 3
Rear Cover for Voron Stealthburner extruder for Bondtech LGX Lite & Lite v2 -Part II
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear Cover for Voron Stealthburner extruder for Bondtech LGX Lite & Lite v2 -Part II
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I upgraded my Voron 2.4r2 FDM printers to Stealthburner from the original Afterburner and after testing I replaced the original Bondtech LGX extruder to the smaller and lighter LGX Lite v2 which utilizes the large filament gears as the original did.
This is Part II which completes the Toolhead with the Rear Cover.
Part I can be found at Extension Lever & Voron Stealthburner extruder body for Bondtech LGX Lite & Lite v2 -Part I
Parts Used
- Extruder Bondtech LGX Lite V2
- ECAS04
- M3 Threaded Inserts VORON
- Filament used: Polymaker ASA Filament 1.75mm Blue