Faceted Big Salt Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Takes 500g of fine grain salt
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Guess I have to call it a remix of the salt dispenser from “Bad Reichenhaller” as this is what brought the inspiration. Ours was overdue for a replacement so…
It took some trial and error for the fitment of the swiveling part of the lid to not be too loose. It became a zero-tolerance fit in the end and it needs quite a bit of gentle violence to snap together.
The lid unscrews making refilling a lot easier than for the original Bad Reichenhaller dispenser (check out the specific funnels for that purpose on here).
Printed mine in PETG 0.4mm nozzle 0.2mm layers. 0% infill for the main body, but make sure to have 5 solid top and bottom layers so the inner and outer bottom are connected. 100% infill for the bolt (or rivet?) and 20% for the lid parts.