Universal Heavy-Duty 5kg 10kg Spool Holder - Drak
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable 5kg filament spool holder, fits any width, supports many bearing types or idlers
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Assembly Video
Story
Hello there!
I couldn’t find the perfect spool holder for my massive 5 kg Sunlu ABS spool,
so I designed my own: adjustable, portable, and lightweight
This spool holder was made to use spare bearings from my Voron 2.4, along with easy-to-find M4 screws and nuts
It’s quick to print, requires no supports, is very light, and assembly is super easy
I’ve uploaded a .3mf file with the best print settings. Some .step files are also included, there are two bodies. Use the one named “Stronk” as a modifier, set infill to 100%, and switch the pattern to concentric
If you own a Bambu Lab printer, I’ve prepared ready-to-print .3mf files for each spool holder version
Check out my profile on MakerWorld for those files!
Minimum recommended spool diameter is from fi250 to 350mm (designed for 300mm Spool)
There is also EXPERIMENTAL fi400 Spool Holder (left fi300, right fi400)


Front fi400, back fi300

Hardware (for two sets):
4x M4 12mm SHCS Screw (can be longer)
4x M4 Nut
8x Bearings (or 4x Belt Idler)
Types of Bearings Supported (ready 3D models):
F604 (F600 Series)
F605
F606
F607
F608
F609
F686 (F680 Series)
F688
F689
F695 (F690 Series) (that's one I used)
F696
F697
F698
F699 (fi400mm Spool)
GT2 Idler 20T W6 B5 without T
GT2 Idler 20T W10 B5 without T
How to check what bearing you have?
It’s simple: just measure it, check the chart below, and find your bearing’s name


It’s usually better to use the biggest bearing you have. Printed pins holding the bearing can then be larger and therefore stronger
If possible, use an idler bearing. They run more smoothly because they don’t create a tiny gap in the middle
That’s right. you can use a belt idler instead of typical flanged bearings
Here’s an example below: an idler for a 10 mm belt. Looks massive, doesn’t it?

I buy idlers like this one from aliexpress here
Idlers should have same dimensions like on picture, to make them work with my design:


Renders




--- Commercial Use ---
By purchasing this design on Cults, you support my work and receive a commercial license to sell physical 3D prints of the model
Click here to purchase the design and get the commercial license (or just type "Drak3D" in Cults Search)

Ready print Profiles for Bambu Printers on MakerWorld, link Below:

Consider SUPPORT MY WORK downloading the models from MakerWorld
This costs nothing, just little bit of time
https://makerworld.com/en/@Drak
There is also a option of Boosting the model On Makerworld, it gives me points as a revand :D
Every download counts!
I appreciate any help <3