Vacuum Cleaner Remote Control for less than 20,-€ (with wireless socket)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder allows to use a remote controlled socket for turning on and off your vacuum cleaner for less than 20,-€.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Vacuum Cleaner Remote Control
Intro
As I use a lot of battery-powered tools in my workshop, I cannot use my vacuum cleaner's power supply to turn it on. So I looked for a remote control and I was shocked about those prices starting from around 80,-€ (brands like Metabo, Festool, Bosch and Milwaukee)
But, remote controlled sockets are pretty cheap to get and why not use one for this purpose? Here's the result:
Parts List
Printed Parts:
Files:
Remote Control holder (2 versions)
Clamp Ring (available for different hose diameters from DN27 to DN50)
Filaments:
PETG recommended (due to flexibility, outdoor resistance and strength)
Special Print Instructions:
min. 3 perimeters
min. 30% infill
Non-Printed Parts:
Socket
Dewenwils outdoor IP44 remote controlled socket OR
Dewenwils indoor remote controlled socket (older version, hardly available in black now)
2x M3 x 6 mm countersunk screw
Updates:
Printed parts:
the remote holder has now a little thinner walls so that the remote is easier to remove but still as safely held as before
Clamp rings are redesigned so that the remote is closer to the hose
The used indoor socket is pretty much sold out in black, so:
you can either get it in white (e.g. here: Link_indoor_white)
or you can get the outdoor IP44 version which iswell available online (e.g. here: Link_outdoor-IP44_black)
Assembly
Carefully screw the two parts together
Click the remote control into the holder
Install the holder on your vacuum cleaner's hose
Keep the vacuum cleaner turned on and control it only via remote
Have fun (:
Final remarks:
There are standardized hose sizes but they only refer to the inner diameter. That's why outer diameters vary a lot and the uploaded clamp might not fit your hose. If this is the case, just reach out with your outer Diameter and I'll make anoher version for it :)
Also feel free to leave a comment and as always: Happy printing!