3D Printable Enclosure for 40×40 mm NVMe Adapter Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Enclosure is designed for a 40×40 mm NVMe adapter PCB, providing precise cutouts and clearances for comp
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printed Enclosure is designed to protect a 40×40 mm NVMe adapter board while providing access to the NVMe slot, USB-C port, and reset button.
cheap nvme adapter from aliexpress:
Material: PLA or PETG
Layer height: 0.2 mm
Infill: 20–25%
Orientation: Print lid upright; no supports needed for internal features.
Assembly Notes:
Ensure the PCB is seated on standoffs in the base enclosure.
Align the lid so the NVMe slot and reset button access properly match the components.
Slide or press the lid into position; the lip groove ensures secure alignment with the base.
use super glue to secure the parts
