1 / 6
Ender 3 NG v1.2 lid corners with PC4-M6 fittings — zdjęcie 1
1 / 6

Ender 3 NG v1.2 lid corners with PC4-M6 fittings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add removable PC4-M6 fittings to the enclosure lid corners of your Ender 3 NG v1.2

Ocena
0 / 5
Polubienia
33
Pobrania
122
Wydruki
0
Wyświetlenia
441
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mod for the Ender 3 NG v1.2 allows you to add PC4-M6 fittings to easily add and remove tubing to the enclosure v2 lid corners.  There are a handful of files in this model, which includes:

  • PC4-M6 fittings, left corner
  • PC4-M6 fittings, right corner
  • PC4-M6 fittings, left corner (without cable management)
  • PC4-M6 fittings, right corner (without cable management)

The PC4-M6 tunnel includes a cone shape, which makes this model friendly to filament switchers.  Any irregularly-shaped ends of filament (i.e. pulled from the hot end while hot) will be guided through the cone without hitting a tight hole or a flat spot.

In addition, this also makes it easier to print.  Print these models with the PC4-M6 thread facing the bed, like so:

Also, heads up: don't simply mirror the models with PC4-M6 threads in your slicer!  This will reverse the threads.  Make sure to specifically print the “left” or “right” models.

Not running any tubing through your other corner?  Use a blank with this model here!

Tagi