1 / 4
A4T Shaker with cutout for V2.4 gantry screw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification to the original shaker to make room for the screw on the bottom of the X/Y joint
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
After adding Blobifier to my Voron 2.4 with an A4T toolhead, the screw on the bottom of the x/y gantry joint kept crashing into the shaker arm. Made some modifications to it to provide clearance.
Orientation should load correctly, you'll just need a little bit of support for the grooves on the bottom.