Wall Bracket for Kayak & SUP Paddles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall brackets to hold paddles up with a shaft diameter up to 32mm. Print strong! Trim plug model included.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
Unlike my recent windsurf mast holder, I just went with a single screw hole. This should be enough for lightweight paddles (as long as the screw hold is solid). With the trim plug and right choice of screw (or paint), you can make very clean looking installation. And it works great as is without the plug, still looking organized and clean.
I am printing in ASA, 0.20mm layers with 4 walls and 10% gyroid infill. Be very sure the material you use is suited for the load you expect it to hold!
The trim plug is entirely optionally to hide the access hole for the screwdriver. I meant it for printing in TPU but printed a test piece in the same ASA at 100% (normal) scale. It fit but needed a rubber mallet for a few taps to be flush and I would consider it semi-permanent at this time. I added a hollow trim plug as another option.
I do have a parameterized file for this model that can be used for all kinds of brackets. This will be available to club members. Let me know if you are interested!