slidable Toniebox bed hanger (holder / bracket / mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact, stable holder for the Toniebox (w. charging station), fits bed edges up to 21 mm and is adjustable in position.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
This Toniebox bed holder allows flexible placement of the Toniebox (with charging station if required) on a bed (inside or outside) or other similarly max. 21mm wide profiles. The design is very stable and allows permanent use of the Toniebox in that location. The holder is slidable.
- Material: PLA should work, but PETG is recommended (due to creep of PLA),
- Layer Height: 0.24 mm
- Infill: 15–20% (Grid or Gyroid)
- Perimeters/Walls: 4
- Supports: use tree supports
- Print Orientation: on the side for maximum stability and minimal support requirements
Installation
Insert the charging plug into the opening from above and then place the charging station in the designated curve. Now you can mount the holder on the bed and place the Toniebox on top.
Do you like my work? I would be very happy if you would support my work on Ko-fi.