USB / Receptacle / Outlet Cable Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounts directly on to the face plate of your duplex receptacle in your home to clean up phone charger wires.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Print Instructions - Minor supports are required for the mounting hole and cable clamps. The support screenshots are in the photos. Average print time for me on the models is 25min.
Print Types - There are 3 separate models ranging from 70mm - 90mm. The measurement is taken from the actual faceplate for your receptacle. If you have an odd sized face plate like 85mm. Choose the next larger size IE 90mm.
In the photos shown I was able to wrap up a 10ft charger cable. This is nice to have when cleaning the floors or having guests over and not having a cable in the way on the couch or laying on the floor. It's a simple and non intrusive print that wont damage your existing wall plate. Enjoy and hope it works for your use case scenario.