1 / 6
Underbody Plug for VW Golf Mk4 (TPU / PETG / PLA) — zdjęcie 1
1 / 6

Underbody Plug for VW Golf Mk4 (TPU / PETG / PLA)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement underbody plug for VW Golf Mk4. Best printed in TPU for sealing, PETG for strength, PLA for tests.

Ocena
0 / 5
Polubienia
3
Pobrania
51
Wydruki
0
Wyświetlenia
276
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Replacement underbody plug designed for Volkswagen Golf Mk4.
This part covers chassis openings to protect against dirt, water, and corrosion. Perfect if the original plugs are missing or damaged.

Designed for FDM 3D printing.

Recommended material: TPU (best sealing and vibration resistance).

Alternative materials: PETG (durable, UV/weather resistant) or PLA (test prints only).

Print orientation: flat on the bed.

No supports required.

Available profiles prepared for Ender 3 V3 SE, Prusa i3 MK3S+, Prusa MK4S, and Prusa XL.

Print Settings:

TPU: 220–230 °C nozzle / 40–50 °C bed / 20–30 mm/s / 30–40% infill / 3 perimeters

PETG: 235–250 °C nozzle / 70–80 °C bed / 40–60 mm/s / 30% infill / 3 perimeters

PLA: 200–210 °C nozzle / 50–60 °C bed / 50–70 mm/s / 20–30% infill / 2–3 perimeters

Verify dimensions with your original part before printing.

TPU version ensures easy snap-fit installation and flexibility.

PLA not recommended for permanent outdoor/automotive use.

Tagi