1 / 3
Drybox Feet for "Silica Gel Box with Sliding Lid" by humebeam — zdjęcie 1
1 / 3

Drybox Feet for "Silica Gel Box with Sliding Lid" by humebeam

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet to fix the silica gel box the “Drybox Spool Holder IKEA Samla 45L for 10 spools" by N405.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
1
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When I printed the “Drybox Spool Holder IKEA Samla 45L for 10 spools” by N405, I faced the issue that the four silica gel boxes in the corners of the spool holder don't keep the humidity low enough in the drybox when fully loaded with 10 spools. So I designed these feet to fix the "Silica Gel Box with Sliding Lid" by humebeam to the middle of the drybox, adding an additional silica gel box to the drybox. This way, humidity stays consistently at 10%.

The feet are fully compatible with the original "Silica Gel Box with Sliding Lid" by humebeam. They simply click into place at the bottom of the box. You don't need to reprint anything.

If you like this model, consider checking out my modified lid for humebeam's "Silica Gel Box with Sliding Lid". It features a snapfit mechanism, making the use of bolts and brass insert unnecessary.

Print Instructions

  • Printed in PLA, but any rigid filament should do
  • 0.2 mm layer height
  • 2 wall loops
  • 25% gyroid infill

Tagi