Cryogrip Compatible Core One Nozzle Wiper Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support Cryogrip Glacier. Does NOT need change to purge line.
- Ocena
- 4,714 / 5
- Polubienia
- 68
- Pobrania
- 302
- Wydruki
- 7
- Wyświetlenia
- 1382
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to support my new Cryogrip Glacier plate. I placed it on the right side so the nozzle wipe procedure won't cause the print head to bang into my Unifi G4 camera. Apparently, the right side is the way to go if you have a Core One+ and above, presumably the left side interferes with the vent opening mechanism?
Check out the complementary purge bin!
Note: Just like the model I remixed this from, you'll need a Voron style M3 D5.0 L4.0 heatset insert.
Sample wipe g-code. Adjust to your liking. Purge line does NOT need to be adjusted.
G0 X250 Y-17.5 Z1.5 F5000 ; Move hotend to position
G0 X206 Y-17.5 Z1.5 F150000 ; wipe left
G0 X242 Y-17.5 Z1.5 F50000 ; wipe right
G0 X210 Y-17.5 Z1.5 F150000 ; wipe left
G0 X242 Y-17.5 Z1.5 F50000 ; wipe right
G0 X210 Y-17.5 Z1.5 F150000 ; wipe left
G0 X242 Y-17.5 Z1.5 F50000 ; wipe right