1 / 5
Lack ENCLOSURE Raisers (10, 20, 30, 40, 50, 60, 70, 80, 100, 120 mm) — zdjęcie 1
1 / 5

Lack ENCLOSURE Raisers (10, 20, 30, 40, 50, 60, 70, 80, 100, 120 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lack ENCLOSURE Raisers to lift the table. With and without tabs to hold glass. (10,20,30,40,50,60,70,80,100,120 mm)

Ocena
0 / 5
Polubienia
54
Pobrania
152
Wydruki
0
Wyświetlenia
1107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Description

Lack ENCLOSURE Raisers to lift the table. With and without tabs to hold the glass. You can find different height files (both with and without tabs)  - 10mm, 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 100mm, 120mm.

How to use it

You will need :

  1. 4 printed Lack ENCLOSURE Raisers. ( I used Prusament PETG, .20mm speed )
  2. 16 wood screws ( I used 2.5mm x 15mm )
  3. Optional - 2mm Plexiglass cut to size


    Remove original Lack Enclosure holders that you printed and attached before from the top of the bottom table. Attach 4 printed raisers with 4 screws to each corner on the bottom tabletop (instead of the original Lack Enclosure Holders you removed. You will not need them anymore). Place the top table on top of them. Done

    If you printed with tabs, you will need to cut 2mm x 445mm width (5mm for clearance)  plexiglass to the desired height (depends on what height you printed your raisers. E.g. for 50mm lift, you will need 2x445x50 plexiglass .

Tagi